NX Basics and User Interface Customization
Create a Template Part
-
01 - Start a New Part and Create Common Part Expressions (1:32)
-
02 - Create Your First Sketch (1:57)
-
03 - Create Reference Geometry: Datum Planes (2:42)
-
04 - Name Features in the Part Navigator (1:09)
-
05 - Part Organization: Layer Management (0:41)
-
06 - Create Additional Expressions (0:38)
-
07 - Modify the Base Sketch (0:42)
Create the Corner Cubelet
-
01 - Perform a Save As on the Template Part (0:24)
-
02 - Create a Sketch: Corner Base Sketch (2:13)
-
03 - Extrude Feature: Base Cubelet (0:29)
-
04 - Create a Sketch: Corner Tab Sketch (1:46)
-
05 - Extrude w/Join: Corner Tab (0:48)
-
06 - Create Sketch: Corner Tab Lightweight and Round (2:36)
-
07 - Modify Sketch: Corner Tab Sketch (1:20)
-
08 - Extrude w/Subtract: Corner Tab Lightweight Pocket and Radius Cut (1:53)
-
09 - Add Sketch: Base Cubelet Wall Thickness (1:20)
-
10 - Extrude w/Subtract: Remove Material to Establish Wall Thickness (0:37)
-
11 - Edge Blend: Tab Edges (1:38)
-
12 - Edge Blend: Cubelet Edges (1:14)
-
13 - Part Cleanup and Best Practices (2:07)
-
14 - Create Mating Geometry (0:37)
-
15 - Create Reference Sets and Set Visible Geometry (1:36)
Edge Cube
-
01 - Save As Template (0:35)
-
02 - Profile Sketch and Extrude (1:45)
-
03 - Modify Profile Sketch (0:55)
-
04 - Modify Edge Extrude (0:51)
-
05 - Sketch Tab (1:54)
-
06 - Inner Tab Sketch (1:10)
-
07 - Complete Inner Tab (1:12)
-
08 - Inner Tab Extrude (1:37)
-
09 - Clearance Cut on Base Solid (0:35)
-
10 - Shell, Subtract, Shell, Unite (1:22)
-
11 - Edge Blends (3:42)
-
12 - Clean Up (2:36)
Center Template Part
-
01 - Save As Template Part and Base Sketch (1:17)
-
02 - Move To Layer - Datum Planes (0:40)
-
03 - Extrude Base Profile (0:27)
-
04 - Create Trimming Solid Cylinder (0:34)
-
05 - Pattern Trimming Solid Cylinder (0:25)
-
06 - Subtract - Use Trimming Solids to Subtract from Base Extrude (0:32)
-
07 - Part Cleanup (1:11)
Center Cube
-
01 - Save As Template (0:17)
-
02 - Create Trim Surface (0:47)
-
03 - Sketch - Center Boss (1:12)
-
04 - Revolve - Center Boss (0:29)
-
05 - Blends - Body Bottom Edges (0:40)
-
06 - Trim Bodies - Main Body and Boss (0:26)
-
07 - Shell - Main Body and Hide Trimming Surface (0:36)
-
08 - Blends - Main Body (0:55)
-
09 - Unite - Main Body to Boss (0:15)
-
10 - Datum Plane - Create Datum Plane for Hole Locating (0:17)
-
11 - Hole - Create Counterbored hole. Revise hole to add lead in chamfer. (1:26)
-
12 - Blend - Boss to Main Body (0:26)
-
13 - Clean Up (0:25)
Center Cap
Core
-
01 - Modify Base Sketch and Extrude First Cylinder (1:40)
-
02 - Move to Layer - Datum Planes (0:23)
-
03 - Create Sketch for Revolve (1:06)
-
04 - Create Revolve Feature and Pattern Geometry (1:06)
-
05 - Hole Feature (0:35)
-
06 - Pattern Feature - Fail (0:38)
-
07 - Unite and Pattern Feature (0:47)
-
08 - Pattern Feature - Fifth Hole (0:23)
-
09 - Reflect Feature (0:28)
-
10 - Clean Up (0:58)
Import Data
Insert Molded Core
-
01 - Create Parent Part (0:32)
-
02 - Create Reference Sets - Core (0:37)
-
03 - Create Reference Sets - Insert (0:38)
-
04 - Add Component - Core (0:24)
-
05 - Add Constraints - Core (0:36)
-
06 - Add Component and Constrain - Insert (0:35)
-
07 - Pattern Components - Insert (0:57)
-
08 - Pattern Remaining Inserts (0:38)
-
09 - Wave Geometry Linker - WaveLink Core and Inserts (1:02)
-
10 - Subtract - Inserts from Core (0:35)
-
11 - Hide Wavelink Bodies (0:42)
-
12 - Create Reference Set (0:54)
-
13 - Orient and Save (0:21)
-
14 - Hide Constraints (1:00)
Spring
Shoulder Screw
-
01 - Create Expressions (1:46)
-
02 - Sketch Profile (0:36)
-
03 - Add Dimensions to Sketch (1:48)
-
04 - Modify and Correct Some Expressions (2:30)
-
05 - Revolve Profile (0:21)
-
06 - Hex Key Lead In Sketch, Extrude-Subtract-Chamfer (1:13)
-
07 - Add Hexagon to Lead In Sketch (0:29)
-
08 - Extrude-Subtract Hex Key - Curve Rules (0:57)
-
09 - Rename Features (1:12)
-
10 - Layer Cleanup (0:38)
-
11 - Create Reference Sets (0:29)
Core Sub-Assembly
-
01 - Add First Component (1:33)
-
02 - Add Center (1:19)
-
03 - Add Spring (1:38)
-
04 - Add Shoulder Screw (1:23)
-
05 - Add Center Cap (1:05)
-
06 - Add Remaining Center Components (3:00)
-
07 - Add Remaining Springs (3:41)
-
08 - Add Remaining Shoulder Screws (3:33)
-
09 - Add Remaining Center Caps (1:54)
-
10 - Clean Up (1:19)
Decals
Top Level Assembly
Core Drawing
Edge Drawing
Core Sub-Assembly Drawing
